QM INDUSTRIES QMMC22J110SEO Cartridge Unit Bearings

S:17.5 mm; G:R1/8"; N:14mm; J:130 mm; A:33.7 mm; T max.:100 °C; Designation of open end cover:SCOU207-21; L:92 mm; e:20 mm; d:33.34 mm;

Prod_Type3:ACBB_FP_A; GRS rpm:1300; da:198; ra:3; d:180; Cr:60500; yobi:QJ336; C0:1770; LangID:1; SRIX:0.21;

T min.:-20 °C; Weight:5.01 kg; Designation of closed end cover:SCC212; B:65.1 mm; T max.:100 °C; Recommended tightening torque for set screw:16.8 Nm; A1:16 mm; L:175 mm; N:18mm; G:R1/8";

Recommended tightening torque for set screw:16.8 Nm; C:43.55 kN; d:50.8 mm; G:M6x1; N1:25 mm; B:55.6 mm; Designation of bearing:UC211-32G2L3; s1:27.8 mm; C0:29.2 kN; H2:126 mm;

s1:30.9 mm; d:25 mm; A:21 mm; L:264 mm; Weight:1.65 kg; d1:37.4 mm; B1:44.3 mm; Recommended tightening torque for set screw:5.5 Nm; G:R1/8"; T min.:-20 °C;

J:148.5 mm; s1:24.6 mm; T min.:-20 °C; L:111 mm; Dz:95 mm; d:42.86 mm; Z:57.7 mm; B:49.2 mm; H:180 mm; A1:13 mm;

N1:25 mm; Z:74.6 mm; H2:165 mm; J:159 mm; s1:25.8 mm; Designation of housing:PH210N-; L1:65 mm; Designation of open end cover:SCOU210-31; B:51.6 mm; Designation of bearing:UC210-31G2;

J:100 mm; L1:40 mm; H:63.5 mm; A:60 mm; T min.:-20 °C; S:22.2 mm; C:43.55 kN; N:M16; H2:126 mm; H1:25 mm;

ra max:2.5 mm; da min:123 mm; Mass:9.54 kg; Fatigue limit load, Cu:6.1 kN; Characteristic inner ring frequency, BPFI:4.94 Hz; B:50 mm; Characteristic cage frequency, FTF:0.38 Hz; Nlim (grease):2,900 rpm; Min operating temperature, Tmin:-25 °C; Max operating temperature, Tmax:170 °C;

Designation of housing:T211N-; Designation of closed end cover:SCC211; A2:38 mm; SW:4.76 mm; L1:106 mm; Dz:110 mm; T max.:100 °C; d:50.8 mm; N:35mm; Designation of bearing:UC211-32G2;

Inventory:0.0; T:25 mm; Dc1:55 mm; Weight / Kilogram:0.552; Nlim (grease):830 rpm; d:55 mm; Brand:NTN; Bearing ring (outer ring) GS:GS81211; C0a:340 kN; D1:57 mm;

hidYobi:7311BWDT; B_:29; ALP22:0; D_:120; SRIN:0; yobi:7311BWDT; SBRG:3; SDM_:87.495; SRIX:0.08; DI_:66.646;

Rating life coefficient, A2:1.9; Fatigue limit load, Cu:11 kN; Nlim (oil):6,800 rpm; a:16.01 mm; C:19.05 mm; ra max:0.8 mm; Mass:0.54 kg; T:23.81 mm; d1:55 mm; B:25.65 mm;

J:96 mm; H1:36 mm; S:7.5 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of bearing:ES205-15G2; C:14 kN; A2:36 mm; T min.:-20 °C; d:23.81 mm; A1:12 mm;

C0:11.5 kN; Weight:1.53 kg; Recommended tightening torque for set screw:11.5 Nm; H:45 mm; L:175 mm; G:M6x1; S:16.7 mm; d1:42.8 mm; H1:15 mm; T max.:100 °C;